Publicité
Troubleshooting
Problem
-Photo Booth will not turn on.
-The Photo Booth screen is frozen.
-The screen looks pixelated or there
are lines running through the image.
-The printer is not printing.
-The printer is printing paper, but there
is no image on the paper after it has
printed.
-The Photo Booth will not connect to the
internet.
-The photos that print look too dark.
-After each photo my Photo Booth
automatically prints.
-The on screen User Interface does not
match the instructions in my user manual.
-My Photo Booth is not functioning
correctly.
-My photos appear out of focus.
14
Possible cause
-Power cord is not plugged into wall outlet.
-Wires/ Plugs are hooked up incorrectly.
-ON/Off button wasn't pressed on top of unit.
-The Photo Booth encountered a problem when
processing the data.
-The printer may be out of paper.
-The printer door may not be closed properly.
-The paper was inserted backwards.
-The paper may have been placed in backwards.
-The Photo Booth may be located too far away
from your wireless router.
-Your WIFI on the Photo Booth may be turned off.
-You may need to reestablish a new connection
to your WIFI router.
-You may be entering the wrong password to
your WIFI network.
-You may not have adequate lighting in the
environment that you have your Photo Booth
set up.
-Your photo paper wasn't calibrated when you
loaded the new paper.
-This is a feature to the Photo Booth that is
found under the Settings Menu.
-After a software update some of the icons and
features may have changed to enrich the user
experience.
-Vous devrez peut-être mettre à jour votre logiciel.
-Your Photo Booth has an auto focus feature
and it is picking up surrounding objects.
Solution
-Make sure power cord is plugged into the wall outlet and
there is power to that outlet. (Plug other electrical equipment
into the power outlet to make sure the outlet normally works.)
-Make sure all wires/ plugs are properly connected and all the
way set in as directed in assembly instructions.
-Push ON/OFF button on top of unit to power on.
-You may need to RESET the Photo Booth.
Unplug the Photo Booth from the wall outlet and wait
60 seconds to RESET the Photo Booth.
Plug the Photo Booth back in and press the ON/OFF button
on top of unit to power on.
-Check to make sure you have paper in the printer.
-Make sure the printer door is closed properly and locked in
place by sliding the door downward until you hear a click
sound. (Refer to User Manual)
-Make sure the printing surface is facing forward.
The text side of paper should be facing inward.
(Refer to User Manual)
-Try moving your Photo Booth closer to your WIFI internet router.
-Make sure the Photo Booth WIFI is turned on under Network
Settings.
-Under the Network Settings choose your network name and
click "Forget Network" then reestablish a new connection by
selecting your network name and entering in your WIFI
password again.
-Make sure you are using the correct password to your WIFI
network. (Always check to make sure your WIFI password works
on your other devices.)
-Try moving the Photo Booth to a well lit room.
-Make sure to use the blue calibration paper when loading
new paper in your Photo Booth. (See User Manual)
-If you would like to turn this feature OFF, click on the Settings
Menu and unselect the Auto Print feature.
-Visit www.tastemakersllc.com/polaroidusermanual for a list of
the most recent features and user interface.
-Click on the Settings tab on your Photo Booth to check for
software updates.
-Try centering yourself in the middle of the screen to maintain
a strong focus on your face/ faces.
Publicité
