Checking the battery charge level
♦
Press the battery charge level button
check the charge level of the battery.
The status/remaining charge is shown on the
battery display LED
GREEN/RED/ORANGE = maximum charge/
performance
RED/ORANGE = medium charge/performance
RED = low charge – charge the battery
Changing tools
Your cordless screwdriver has a fully automatic
spindle lock
.
When the motor is at a standstill, the drive train is
locked so that you can open the drill chuck
turning it
. After you have attached the desired
tool and locked it in place by turning the chuck
you can continue working. The spindle lock is
released automatically when the motor is started
(by pressing the ON/OFF switch
Torque selection ring/drill setting
You can set the torque using the torque selection
ring
.
♦
Select a low level for small screws or soft
materials.
♦
Select a high level for large screws, hard
materials or removing screws.
♦
For drilling operations, select the drill setting by
moving the torque selection ring
position.
│
GB │ IE
■
22
to
as follows:
by
).
to the
2-speed gearbox
CAUTION!
►
Operate the speed selector switch
when the appliance is at a standstill. Other-
wise, the tool could be damaged.
In first gear
(speed selector switch
you can reach a speed of approx. 400 rpm and a
high torque. This setting is suitable for all screwing
jobs.
In second gear
(speed selector switch
you can reach a speed of approx. 1400 rpm for
carrying out drilling work.
,
Use
Switching on/off
Turn on
♦
Press and hold the ON/OFF switch
up the appliance.
The LED work light
OFF switch
provides illumination of the work area in poor
lighting conditions.
Switching off
♦
Release the ON/OFF switch
the appliance.
Setting the rotational speed
The ON/OFF switch
control. Pressing the ON/OFF switch
yields a low speed. Increasing the pressure
in creases the speed.
NOTE
►
The integrated motor brake ensures that the
tool stops quickly.
in position 1),
in position 2),
lights up when the ON/
is pressed lightly or fully. This
to switch off
has a variable speed
PABS 20-Li D5
only
to start
lightly