Burkert 8030 Notice D'utilisation page 28

2 SPECIFICATION
2.1 Flow Sensor 8030 type specification
The flow sensor 8030 is made of an electronic module SE30 designed to be mounted
on a fitting S030 which houses the paddle-wheel.
Refer to the specific in struction manual for the fitting type S030.
Sensor electronic
1 SE30 with coil
2 SE30 with Hall sensor
3 SE30 with Hall sensor "Low Power"
2.2 Dimensions of the flow sensor type 8030 Inline
Type 8030 standard 1 2 3
8030 with 4...20 mA output 5
and programming unit type 1077-3 6
8030
FLOW SENSOR TYPE 8030
Power supply
none
12-30 VDC
from 8021/3/5
Type 8030 with 4...20 mA 5
or calibrated frequency output 4
DN H1
mm inch
15 92,0 3,63
20 89,0 3,51
25 89,5 3,53
32 93,0 3,67
40 97,0 3,82
50 104,0 4,10
The heigth H is independant from the
connection type and material of the
fitting.
E-3-
Cable entry Order N
PG9 423912 C
PG9 423913 D
PG9 423914 E
H4 H6
mm inch mm
113,5 4,47 125,5 4,95
110,5 4,36 122,5 4,83
111,0 4,37 123,0 4,85
114,5 4,51 126,5 4,99
118,5 4,67 130,5 5,14
125,5 4,95 137,5 5,42
°
inch