Restore Factory Default Settings "Fac; Troubleshooting - TOOLCRAFT LSH-880 Mode D'emploi

h) Restore factory default settings "FAC"
To restore all settings to factory defaults:
1. Enter the settings menu and navigate to "FAC.
2. Choose the "on" setting.
3. Save the setting and exit.
Default settings
1
Setting
Ht
Loc
C-F
CAL
bL
PSd
FAC
Memory 1
Memory 2
Memory 3

12. Troubleshooting

Error
No power to the worksta-
tion.
34
Defaults
OFF
OFF
°C
No compensation
ON
OFF
OFF
Unheated air / 50 %
300 °C / 50 %
400 °C / 50 %
Possible cause
There is no temperature reading.
The maximum temperature was
exceeded.
Power cable is not connected
The fuse has blown
Description
Working timer
Temperature lock
Switch between °C and °F temperature units
Temperature calibration
System sound "beep" (ON / OFF)
Passcode
Restore factory settings
Cool air "CL" / airflow percentage
Temperature / airflow percentage
Temperature / airflow percentage
Suggestion
Please contact technical support service or
other technical personnel.
• Reduce the temperature setting.
• Switch the main power OFF, wait 20 min-
utes then turn back ON.
• If still receive the error code, please contact
technical support service or other technical
personnel.
Make sure it is plugged in correctly.
Check the fuse. See "13. Replacing the fuse"
on page 35.