Temperature / Airflow Short Cut; Display Screen Status - TOOLCRAFT LSH-880 Mode D'emploi

e) Temperature / airflow short cut
Default shortcuts
1
Shortcut key
Memory 1
Memory 2
Memory 3
Recall shortcuts:
2
Press a shortcut button 1, 2, or 3, for quick access to settings.
Saving shortcuts:
3
• Adjust the temperature by pressing the TEMP ▲/ ▼ buttons.
• Adjust the airflow rate using the AIR - / + dial.
• Press and hold a shortcut button 1, 2, or, 3 for more than 2 seconds. The display will blink to indicate the shortcut
has been saved.
f) Display screen status
The following are examples of various display screens you may encounter while using the product.
Display
u 0
0 0 0 0
REAL
3 0 0
5 0
REAL
C - L
5 0
30
Setting
Unheated air / 50 %
300 °C / 50 %
400 °C / 50 %
Description
Boot-up
After switching on, the display will briefly show the system version number
before showing the working display.
Normal working
C
• The set temperature is 300 °C.
• The temperature is locked
%
• Airflow rate is 50 %
Normal working
C
• The factory default setting for shortcut key 1 is the cool air function "C - L".
• C - L shows when the temperature is set <100 °C.
%
Description
Cool air "CL" / airflow percentage
Temperature / airflow percentage
Temperature / airflow percentage