Control Panel - HQ Power VDPLB408WL Mode D'emploi

dimmer channel is used solely for 0 % to 100 % switching.

The device has a power output [10] to supply power to another device. When connecting several
devices in a daisy chain via this output, make sure that the total current does not exceed the power
line's nominal current. Use power cables with an adequate section.

The installation has to be approved by an expert before the device is taken into service.
DMX-512 Connection

When applicable, connect an XLR cable to the female XLR output of a controller (not incl.) and the
other side to the male XLR input [6] of the device. Multiple devices can be linked through serial
linking. The linking cable shall be a dual core, screened cable with XLR input and output connectors.

Maximum recommended serial data link distance is 500 meters (1640 ft). Maximum recommended
number of devices on a serial data link is 32 devices.

A DMX terminator is recommended for installations where the DMX cable has to run a long distance
or is in an electrically noisy environment (e.g. discos). The terminator prevents corruption of the
digital control signal by electrical noise. The DMX terminator is simply an XLR plug with a 120 Ω
resistor between pins 2 and 3, which is then plugged into the XLR output socket [10] of the last
device in the chain.
8. Operation
The device can be used in the following modes:

stand-alone mode: automatic or sound-activated

master/slave

with a DMX-512 controller.
8.1

Control Panel

Control Buttons
Access the control panel functions using the four panel buttons [3] located below the display [2].
Button Function
MENU to access the menu, quit the current function without saving the setting, or quit the
menu
UP to scroll upward in a list of functions or options, or increase a value
DOWN to scroll downward in a list of functions or options, or decrease a value
ENTER to confirm and save a selected option or value
8.2 Menu
menu level 1
4-CH
6-CH
10CH
C--
V. 01 – 19/11/2014
menu level 2 menu level 3
d 1
d512
d 1
d512
d 1
d512
C 1
2
3
4
5
6
7
8
9
10
11
VDPLB408WL
description
Channel selection
1: R
2: G
3: B
4: W
5: GB
6: RB
7: RG
8: RGB
9: RW
10: GW
11: BW
7 ©Velleman nv