Stand-Alone Mode - HQ Power VDPLB408WL Mode D'emploi

P--
S--
Snd
SenS
U--
dIM
SET
S-tr
8.3

Stand-Alone Mode

In stand-alone mode, the device runs one of the built-in programs: automatic or sound-activated.
Stand-Alone Mode with Built-in Programme
To set the device to stand-alone mode:
1. Unplug any connection from the DMX input [6] of the device.
2. Press MENU to open the menu.
3. Select <P-->.
4. Select one of the built-in programmes.
Sound Activation
With sound activation, the built-in program responds to sound. To use sound activation with the selected
built-in program:
1. Press MENU to open the menu.
2. Select <Snd>.
V. 01 – 19/11/2014
VDPLB408WL
12
13
14
15
P 1
P 2
P 3
P 4
S 1
S100
u 0
u100
r 0
255
g 0
255
b 0
255
W 0
255
OFF
dIM1
dIM2
dIM3
On
OFF
drAS drAU
dr 1
drCH
dtAS dtAU
dr 1
dtCH
12: RGW
13: RBW
14: GBW
15: RGBW
Programme selection
Programme speed
Sound-activated mode
Sound sensitivity
User-programmed colours
Dimmer speed setting
Automatic wireless reception
Manual wireless reception
16
Automatic wireless transmission
Manual wireless transmission
16
8 ©Velleman nv