Sony LMD-2110MD Instructions D'utilisation page 49

Submenu Setting
FORMAT DISPLAY Selects the display mode of the
signal format.
• AUTO: The format is displayed
• ON: The format is always
• OFF: The display is hidden.
LANGUAGE Selects the menu or message
language from among seven
languages.
• ENGLISH: English
•
•
• ITALIANO: Italian
• ESPAÑOL: Spanish
• DEUTSCH: German
• FRANÇAIS: French
BACKGROUND Sets the brightness of the black bars
appearing on the sides of the
screen.
• OFF: Displays a darker bar
• ON: Displays a brighter bar
I/P MODE (picture delay Select to set the delay by the picture
minimum) processing to the minimum level
when the signal is input.
• INTER-FIELD: Performs
• LINE DOUBLER: The
for about 10 seconds when
the input of the signal starts.
displayed.
: Chinese
: Japanese
(black).
(gray).
interpolation depending on
the movement of the images
between the fields. It takes
longer than "LINE
DOUBLER" for processing
the picture. "INTER-
FIELD" is the factory
setting.
processing time is shorter.
Performs interpolation by
repeating each line in the
data receiving sequence
regardless of the field. As
the line flicker is displayed
in this mode, it is available
for checking the line flicker
of the telop work and so on.
Submenu Setting
SD PIXEL MAPPING Selects SD picture size (pixels)
according to input signal format.
• COMPOSITE&Y/C: Set to
• RGB/COMPONENT: Set to
When picture signals in the
When picture signals in the
monitor the signal input
through the LINE connector
(VIDEO IN or Y/C IN
connector).
monitor the signal input
through the RGB/
COMPONENT connector.
size of 720 × 576 (50i)
(or 720 × 487 (60i)) are
input
Select 720 × 576 (or 720 ×
487). This is the default
setting.
When 702 × 576 (or 712 ×
483) is selected, all sides of
the input picture are cut off
by several pixels.
size of 702 × 576 (50i)
(or 712 × 483 (60i)) or
equivalent are input
Select 702 × 576 (or 712 ×
483).
When 720 × 576 (or 720 ×
487) is selected, a black
border (of several pixels
wide) appears around the
input picture.
49
Adjustment Using the Menus