afx light DMX MOVING HEAD 7R 230W Manuel D'utilisation page 5

Features
Channel: 20/16 channels, DMX512
Pan scan: 540° (16 bit)
Tilt scan: 270° (16 bit)
Color wheel: 15 colors + white + rainbow effect
Gobo wheel 1 : 17 fixed gobos + open
Gobo shake function
Strobe: 20 f/s
Electronic focus
8 faces prism
Frost
High resolution LCD display
OPERATION
The LCD display shows you all informations about moving head control
The wheel is used to select all menus and validate your setups
MENU :
- DMX address : Used to select DMX address
- Display :
- Showreve : Select display : Normal or reversed ( 180° )
- Language : To select language ( chineese or english )
- Brigsett : To set the brightness of the display ( between 00 and 255 )
- Backlight : To set the delay of the backlight ( either 1mn, 5mn or 8mn, either backlight light always )
- MenuBack : to select the delay to main menu return ( either after 1mn, 5mn or 8mn, either never )
- Backflash : DMX display indication ( either display blink when no DMX signal, either no blick )
- : To return to previous menu
- Features :
- X / Y setup : Pan and Tilt setups
- Xreverse : Pan move ( normal or reversed )
- Yreverse : Tilt move ( normal or reversed )
- XY speed : Pan / tilt moves speed ( Fast, normal or slow )
- Angle Pan : 360°/ 540° / 630°
- XY Fback : Test Pan / Tilt
- : To return to previous menu
- Shortcut : shortcut colors and gobos ( whithout ( Off ) or with ( Open ))
- Fullcolor : Display color on color wheel ( half color ( Off ) or Full color ( Open ))
- Chanmode : DMX mode select ( soit simple ( small 16 CH or normal( standard 24CH))
- Recemode : Operating mode select( DMX, wireless or auto )
- Runmode : Stand alone mode select ( slave ( slve ), Sound ( Musc ) or auto ( Auto ))
- Sigclear : Input DMX signal select ( Keep input DMX signal ( Keep ) or clear input DMX signal ( clear ))
- DMX reset : DMX reset validate ( No DMX reset ( Off ) or DMX reset ( Open )
- : To return to previous menu
© Copyright LOTRONIC 2015 BEAM7R Page 5