Meister MHP36 Traduction Du Manuel D'utilisation Original page 87

− Do not use any flammable solvents to clean the
area to be glued.
Use
− The ambient temperature and the materials to be
glued may not be cooler than 10°C or warmer than
40°C.
Switching on the glue gun
1. Choose a suitable, non-flammable work surface
for using the glue gun.
2. Slide out the holder with the drip tray (7a) from the
charging station. It is designed to catch any drip-
ping glue.
3. Insert a glue stick (5) fully into the feed channel (3).
4. To switch on the glue gun, press and hold the On/
Off switch (4) until the temperature indicator (1)
lights up red.
5. Allow the glue gun to heat up before squeezing
the trigger (8). Once the glue gun reaches its oper-
ating temperature, the temperature indicator will
turn green.
Applying the glue
64500-Akku-Heiss_man.indd 87
The glue hardens quickly. Ensure that you
bond your materials together quickly. Press
them together for approx. 30 seconds. The
glue will set after approx. five minutes.
87
14.06.19 10:21