End Of Service Measures; Instructions For Overhaul; Disassembly - RAMSEY WINCH H 49,8 Série Traduction Des Instructions Originales

END OF SERVICE MEASURES

When winch reaches the end of it's serviceable life, dispose of per local environmental regulations.
INSTRUCTIONS FOR OVERHAUL OF RAMSEY
MODEL H 49,8
DIS-ASSEMBLY
FIGURE 1
Drain oil from gear housing by removing pipe
plug #69 from bottom of gear housing.
Remove relief fittings #66 and reducer #68 from top
of gear housing.
FIGURE 2
Slide clutch housing #19 from end of drum shaft.
Remove setscrew #53, spring #73 and poppet ball
#38 from jaw clutch #9. Slide jaw clutch from end of
drum shaft.
Remove two keys #27 from keyways. Once keys
have been removed, drum #13 and drum spacer #34
can be removed from drum shaft.
FIGURE 3
Remove motor #67 and coupling assembly #1 from
adapter #2 by unscrewing two capscrews #52.
Remove key #25 from worm shaft. Unscrew six
capscrews #51 and remove adapter from gear
housing. Replace adapter seal #72 and gasket #62.
FIGURE 1
FIGURE 2
FIGURE 3
9