Publicité
Les langues disponibles
Les langues disponibles
4. Put the door on a soft cloth on a stable surface.
5. Release the locking system to remove the
internal glass panel.
6. Turn the two fasteners by 90° and remove them
from their seats.
90°
7. First lift carefully and then remove the glass
panel.
8. Clean the glass panels with water and soap.
Dry the glass panels carefully. Do not clean the
glass panels in the dishwasher.
When the cleaning is completed, install the glass
panel and the oven door.
When installed correctly the door trim clicks.
Make sure that you install the internal glass panel in
the seats correctly.
REPLACING THE LAMP
WARNING! Risk of electric shock.
The lamp can be hot.
1. Turn off the oven.
Wait until the oven is cooled down.
2. Disconnect the oven from the mains.
3. Put a cloth on the bottom of the cavity.
The back lamp
1. Turn the lamp glass cover to remove it.
2. Clean the glass cover.
3. Replace the lamp with a suitable 300 °C heat-
resistant lamp.
4. Install the glass cover.
2
1
A
17
Publicité
