Accessories - Stiga SHT 500 Manuel D'utilisation

24
EN
electric cables regularly and replace them if
they are worn or their insulation looks dam­
aged.
If the electric cable is damaged, have it replaced
with a genuine spare part by a qualified technician.
4. EXTRAORDINARY MAINTENANCE
All maintenance operations not foreseen in this
manual must be performed exclusively by your
dealer.
All and any operations performed in unauthorised
centres or by unqualified persons will totally invali-
date the warranty.

9. ACCESSORIES

Only cutting tools with the following codes must be
used on this machine:
118800572/0 = SHT 500 - H 500 E
118800573/0 = SHT 600
MAINTENANCE AND STORAGE / ACCESSORIES
5. STORAGE
After every work stint, clean the machine thor-
oughly to remove all dust and debris, and repair
or replace any faulty parts.
The machine must be stored in a dry place away
from the elements and out of the reach of children.
Given the product evolution, the above mentio-
ned tools may be replaced in time by others,
with similar interchangeable and operating safety
characteristics.