Safety Information - SilverCrest SDB 2400 B2 Mode D'emploi

Safety information

DANGER – RISK OF ELECTRICAL SHOCK!
The rating of the local power supply must correspond with the details
►
given on the rating plate of the appliance.
To avoid potential risks, arrange for a defective appliance to be
►
checked and possibly repaired by qualifi ed technicians, or contact
our Customer Service Department.
To prevent accidents, have defective plugs and/or power cables
►
replaced immediately by an authorised specialist technician or our
Customer Service department.
Always disconnect from the mains power socket by pulling only on
►
the plug itself, never on the mains cable.
Never bend (kink) or crush the power cable, always route it in such
►
a way that it cannot come into contact with hot surfaces and such
that no one can step on or trip over it.
After every use, before cleaning and when refi lling with tap water,
►
always remove the plug from the mains power socket.
Always unroll the power cable fully before switching on and do not
►
use an extension cable.
Never touch the power cable or the plug with wet hands.
►
Never use the steam iron adjacent to water contained in a bath, shower,
►
wash basin or other vessels. The proximity of water is hazardous,
even if the appliance is switched off .
Under no circumstances should you submerge the steam iron in any
►
liquid or permit liquids to penetrate into the housing of the steam iron.
Do not expose the appliance to humidity and do not use it outdoors.
If any liquid gets into the housing, disconnect the appliance from the
mains power socket immediately and have it repaired by a qualifi ed
technician.
SDB 2400 B2
GB │ IE │ NI
3 ■
│