Troubleshooting - SilverCrest SDB 2400 B2 Mode D'emploi

Troubleshooting

PROBLEM
The appliance is not
working.
The steam iron is
producing no steam
or very little steam.
The steam iron does
not get hot.
If the malfunction cannot be corrected using one of the suggestions above, or if you have found some
other kind of malfunction, please contact our Customer Service department.
SDB 2400 B2
POSSIBLE CAUSE
The appliance is not connect-
ed to a mains power socket.
The appliance is damaged.
The reserves of water in the
steam iron are depleted.
The steam iron is not plugged
in or is not switched on.
The steam iron is defective.
POSSIBLE SOLUTIONS
Connect the appliance to
a mains power socket.
Contact the Customer
Service department.
Fill the water tank with
water (See "Filling the
water tank").
Insert the plug into a mains
power socket and adjust
the temperature regulator
to the desired temperature
level.
Arrange for the steam iron
to be repaired by qualifi ed
specialists.
GB │ IE │ NI
11 ■
│