Wilo Para Notice De Montage Et De Mise En Service page 31

Technical data
Connection voltage
Protection class
Energy efficiency index EEI
Fluid temperatures at max. ambient
temperature
Ambient temperature
Max. operating pressure
Minimum inlet pressure
at +95 °C/+110 °C
Indicator lights
(LEDs)
Installation and operating instructions Wilo-Para
• Signal display
• LED is lit up in green in normal operation
• LED lights up/flashes in case of fault
• Display of selected control mode Δp-v, Δp-c and con-
stant speed
• Display of selected pump curve (I, II, III) within the
control mode
• LED indicator combinations during pump venting
function, manual restart and key lock
1 ~ 230 V + 10 %/-15 %, 50/60 Hz
IPX4D
See rating plate (6)
-20 °C to +95 °C (Heating/GT)
-10 °C to +110 °C (ST)
0 °C to +70 °C
10 bar (1000 kPa)
0.5 bar/1.0 bar (50 kPa/100 kPa)
31