Eaton Powerware 9125 Guide D'installation page 27

7. Position two of the pedestals over the edge of each cabinet so that
the weight of the unit is evenly distributed. Secure the pedestals
with the screws provided in the accessory kit.
8. Carefully position the cabinets upright with the air vents at the top
(see Figure 19 or Figure 20).
NOTE Pedestals are required for one and two cabinet installations. Joining brackets are
required for all tower EBM installations.
®
EATON Powerware 9125 (9910-P30) UPS Installation Guide for IBM
Air Vents
UPS with EBM
Figure 19. Pedestals with Two Cabinets
Air Vents
Figure 20. Tower Setup with Three Cabinets
®
Applications
INSTALLATION
UPS with PDM
S 13
164201636 Rev A