Eaton Powerware 9125 Guide D'installation page 23

10. Slide the UPS and any optional cabinets into the rack.
11. To secure the back of the UPS to the rack, loosen the wing nut on
the rear hold-down bracket and slide the bracket over the rear of
the UPS. Tighten the wing nut.
®
EATON Powerware 9125 (9910-P30) UPS Installation Guide for IBM
Figure 10. Installing the UPS
Figure 11. Securing the Back of the UPS
® S
Applications
INSTALLATION
Rear Hold-Down
Bracket
9
164201636 Rev A