Powerware PW5140 Guide D'installation page 14

Installation
10
5. Connect the input and ground wires to the input terminal block
according to the wiring instructions below the terminal block
(see Figure 11).
6. If you have a PW5140 6000 HW model, remove the output
wiring knockout and the terminal block cover (see Figure 12).
Retain the terminal block cover.
Connect the output and ground wires to the output terminal
block according to the wiring instructions below the terminal
block (see Figure 11 and Figure 12).
Figure 12. PW5140 6000 HW Model
7. Replace the terminal block cover(s).
Powerware 5140 Installation Guide for IBM Applications
®
Ground
Figure 11. Terminal Block
Line 2/Neutral
Line 1
Input Terminal
Block
Output Terminal
Block
Output Wiring
Access Knockout
05146790 A Uncontrolled Copy
S