Powerware PW5140 Guide D'installation page 11

Powerware 5140 Installation Guide for IBM Applications
®
5. Slide the left battery tray into the chassis. Repeat for the right
battery tray.
6. For each battery tray, remove the battery connector cover.
Remove the cover screw and discard the cover. Reinstall the
screw to secure the sheet metal (see Figure 7).
Figure 7. Removing the Battery Connector Covers
7. Secure the battery trays to the chassis with the screws provided
in the kit (see Figure 8).
Figure 8. Securing the Battery Trays
05146790 A Uncontrolled Copy
S
Installation
7