Télécharger Imprimer la page

Peg-Perego Viaggio FLEX SURE FIX Notice D'emploi page 27

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29
• Do not use chlorine bleach.
• Do not iron.
• Do not dry clean.
• Do not remove stains with solvents.
• Do not tumble dry.
Repositioning the car seat
cover:
RELINING THE SEAT:
31• Insert the plastic panel in the pocket
of the seat lining.
32• Slip the seat lining on from the
front (fig_a), inserting the profile in the
appropriate slot (fig_b).
33• Insert the two hooks on the base
of the seat near the bottom of the
backrest.
34• Finally, attach the two side eyelets
to the buttons on the sides of the seat.
RELINING THE BACKREST:
35• Slightly widen the side wings of the
car seat and insert the plastic flaps into
their slots in the backrest, ensuring they
come out below as shown in figure.
36• Slip on the side lining and fasten the
two upper elastic bands; repeat for the
lower elastic bands.
37• Fasten the four side eyelets to the
appropriate buttons.
RELINING THE HEADREST:
38• Slightly raise the headrest and put
the lining back in place, fastening the
two elastics as shown, first on one side
(fig_a) and then on the other (fig_b),
and paying attention to the white
polystyrene.
39• Fasten the back cover along
the three central points above the
adjustment handle, following the
sequence shown in the figure.
40• Finally, fasten the two sides to the
headrest.
How to fold the car seat
41• Lower the headrest (1), tighten
the side restraining wings (2) and, if
necessary, push in the cup holders (3).
42• Pull the ribbon upwards (1) to
release the backrest and at the same
time push the backrest down (2); this
will fold down onto the car seat.
43• Attach the ring that fastens the
backrest to the seat when the product
is closed.
Transport
44• Viaggio 2-3 Flex is easily carried
using a handy transport handle
Accessories
45• Travel Bag Car Seat: practical car
seat bag, keeping the seat clean and
protected
Serial numbers
46• The following information can be
found under the Viaggio 2-3 Flex car
seat: product name, production date
and serial number. Moreover, the type
approval label can be found behind
the backrest.
Product cleaning
This product requires minimal
maintenance.
• Cleaning and maintenance must
20

Publicité

loading