InstallatIon
Preparations
8.2
accessories
special aerator "sr"*
- SR 3: Part number 289591
for DHM 3 and DHM 4
- SR 5: Part number 270582
for DHM 6 and DHM 7
* For use in thread M22/M24.
Pressure-tested tap
- WEH Sensor tap for washbasins
non-pressurised taps
- WEN Sensor tap for washbasins
- MAZ Twin lever basin tap
- MAE Mono lever basin tap
Zta 3/4 - central thermostatic valve
Thermostatic valve for central premixing, for example for operat-
ing an instantaneous water heater with a solar thermal system.
34
| DHM
9.
Preparations
f Flush the water line thoroughly.
f
water installation
A safety valve is not required.
taps
f Use suitable taps (see chapter "Appliance description /
f
Accessories").
Note
Fitting the special aerator supplied provides an optimum
water jet.
10. installation
10.1 installation site
Install the appliance in a room free from the risk of frost and near
the draw-off tap.
Ensure that the lateral fixing screws for the cover are always
accessible.
The appliance is only suitable for undersink installation (water
connections at the top).
www.stiebel-eltron.com