InstallatIon
Installation
f Route the power cable through the cable entry in the back
f
panel.
f Hook in the appliance cover with the heater at the bottom.
f
f Click the heater into place using the snap fastener.
f
f Secure the appliance cover with the cover fixing screws.
f
www.stiebel-eltron.com
10.2.2 tap installation
!
Pressurised connection
f Fit the 3/8 connection hose provided and the 3/8 tee.
f
f Install the tap. For this, also observe the tap operating and
f
installation instructions.
non-pressurised connection
f Install the tap. For this, also observe the tap operating and
f
installation instructions.
Material losses
When making the connections, counter the torque on the
appliance using a size 14 spanner.
DHM |
37