InstallatIon
Installation
10.2.1 appliance installation
f Mount the appliance on the wall.
f
Note
The wall must have a sufficient load-bearing capacity.
f Undo the cover fixing screws by two turns.
f
f Undo the snap fastener using a screwdriver.
f
f Remove the appliance cover with the heater towards the
f
front.
36
| DHM
f Using pliers, break out the knock-out for the power cable
f Use the appliance back panel as a drilling template.
f Secure the appliance back panel to the wall with suitable
f
in the appliance cover. Correct the contours with a file if
necessary.
f
f
rawl plugs and screws.
www.stiebel-eltron.com