Permanently Saving Additional Weight (Pt) - Seca 287 Mode D'emploi Et Garantie

Permanently saving additional
weight (Pt)
The set additional height (in this case: 4 cm) is displayed.
4. Ask the patient to step onto the scale.
The patient's height is displayed.
The saved additional height has been deducted automatically.
5. To deactivate the function, select the item "ZEro" from the menu again.
6. Confirm your selection.
The set additional height is no longer displayed.
The function is deactivated.
ZERO
NOTE:
If for documentation purposes, you transmit results of relative
measurements to devices which calculate BMI or BFR automatically,
plausible values will not result for these two parameters.
Using the Pre-tare function (Pt), you can permanently save an additional
weight and have it deducted from a measured result automatically. For exam-
ple, you can save a standard weight for shoes and clothing and then have it
deducted from the measured result whenever a patient is weighed fully-
clothed.
1. Select the item "Pt" from the menu.
The last set additional weight flashes in the display.
"Pt" appears in the display.
2. You can adopt the saved value or set a different value using the arrow
keys.
NOTE:
When you enter the value "0", the function is switched off. The
message "Pt" is no longer displayed.
3. Confirm your selection.
The set additional weight (in this case: 4 kg) is displayed with a minus sign
in front.
The messages "NET" and "Pt" are displayed.
4. Ask the patient to step onto the scale.
NET
The patient's weight is displayed.
The saved additional weight has been deducted automatically.
5. To deactivate the function, select the item "Pt" from the menu again.
6. Confirm your selection.
The set additional weight is no longer displayed.
The function is deactivated.
English
Operation • 87