Activating/Deactivating The Announcement "Take Your Printed Ticket" (Print); Activating/Deactivating Announcement Of Patient Instructions (Instr); Configuring Beeps - Seca 287 Mode D'emploi Et Garantie

Activating/deactivating the
announcement "Take your printed
Activating/deactivating
announcement of patient
instructions (InStr)

Configuring beeps

3. Use the arrow key (send/print) to select the menu item "reSUL".
4. Select the desired setting:
5. Confirm your selection.
You exit the menu automatically.
If you have connected a seca wireless printer to the device, you can set the
device so that following the measurement, there is an announcement telling
you to take the printed ticket with the results.
ticket" (Print)
1. Select the item "VOICE" from the menu.
2. Confirm your selection.
3. Use the arrow key (send/print) to select the menu item "Print".
4. Select the desired setting:
5. Confirm your selection.
You exit the menu automatically.
You can set the device so that patient instructions are announced for every
measuring operation.
1. Select the item "VOICE" from the menu.
2. Confirm your selection.
3. Use the arrow key (send/print) to select the menu item "InStr".
4. Select the desired setting:
5. Confirm your selection.
You exit the menu automatically.
►
Configure the beeps as described in the section entitled "Activating/
deactivating beeps (bEEP)" on page 88.
– On
– Off
– On
– Off
NOTE:
Select a language the patient understands (see "Selecting language
(LAng)" on page 82).
– On
– Off
English
Operation • 83