Sirius S900 Instructions D'utilisation Et Avis De Montage page 18

To replace the round or square LED lamps, you
have to check first if it is possible to access the
back side of the lamp with your hand (Pic. 12).
If it is possible to access the back side of the lamp,
you have to: insert your hand , push at the same
time both support wings of the lamp (Pic. 13),
push to remove the lamp (Pic. 14).
If it is not possible to access the back side of the
lamp, you have to: provide yourself with a sharp
utensil, insert the utensil between the lamp and
the stainless steel frame (on the side where the
little support wings are placed), push to remove
the lamp from the cooker hood (Pic. 15).
* Warning! To take down the appliance from the
cabinet, remove the definitive fixing screws (fig.
6) using a screw-driver, get off the grease filters
(fig.3B) and the active carbon filters, if they are
inserted (fig. 7A). Act on the small handle of the
springs, which are inside the built-in unit, with the
necessary strength to unhook the appliance from
the cabinet.
* If the supply cord is damaged, it must be repla-
ced by the manufacturer or its sevice agent or a si-
milarly qualified person in order to avoid a hazard.
18