Technical Specifications; Remote Control Operation; Remote Controller - Antari Z-SERIES Mode D'emploi

Masquer les pouces Voir aussi pour Z-SERIES:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Technical Specifications

Model
Power Supply
Power Consumption
Output Volume
Tank Capacity
Fluid Consumption
Weight
Dimensions (LxWxH)
Remote Included
Optional Remote
Warm-up Time

Remote Control Operation

Z-10: 10 meter wired remote controller with 6,3 mm jack plug of ANTARI Fog Machine models Z-800II, Z-
1000II and Z-1020. The red lamp indicates that the unit is receiving power. When the fog machine has
reached operating temperature the green light on this remote control will light up, indicating that the operator
may begin fog emission by pressing the red button. The green light flashes during fog machine warm-up
and re-heating cycles (approx. 1-2 minutes), and stays ON when the machine becomes operational. The Z-
10 features the "toggle switch'' function: press once for continuous "ON", press again to release continuous
"ON" function
Z-40: 10 meter wired remote controller with 6,3 mm jack plug for ANTARI Fog Machine models Z-800II, Z-
1000II and Z-1020. Its two knobs allow the operator to customize fog machine functions by adjusting output
duration and interval. Press the yellow TIMER-button to activate the timer function. Adjust the interval
between each fog emission (within the range of 1 second to 250 seconds) by means of the INTERVAL
control knob. Adjust the duration of each fog emission (within the range of 1 to 15 seconds) by means of the
DURATION control knob. When pressed, the green FOG button overrides all other control functions and
activates maximum output. Press the red POWER ON/OFF button for continuous output.
Z-50: Wireless remote controller with 6,3 mm jack plug for ANTARI Fog Machine models Z-800II, Z-1000II
and Z-1020. A remote operation is possible up to a distance of 50 meters. Keep the red button pressed for
fogging.
Z-10, Z-40, Z-50 Remote Controller
Z-800II
800 W
85 m³/min.
0.8 liters
37 min./ 0.8 liter
3.5 kg
315 x 130 x 210 mm
Z-10
Z-40, Z-50
100 seconds
Z-1000II
115/230 V AC 50/60 Hz ~
1,000 W
284 m³/min.
1.7 liters
49 min./ liter
6.6 kg
435 x 200 x 230 mm
Z-10
Z-40, Z-50
4.5 min.
Z-1020
1,000 W
284 m³/min.
2.5 liters
24 min./ liter
9.8 kg
370 x 295 x 135 mm
Z-10
Z-40, Z-50
12 min.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Z-800iiZ-1000iiZ-1020Z série

Table des Matières