Cleaning And Storage; Technical Specifications - Antari W-508 Mode D'emploi

Cleaning and Storage

Do not allow the fog liquid to become contaminated. Always replace the cap
on the fog liquid container and the fog machine liquid tank immediately after
filling. Cleaning your fog machine regularly can help you to reduce the
frequency of parts replacement and maintenance costs. After every 40 hours
of continuous operation, it is recommended to use distilled water to clean the
heater according to the steps below.
The recommended cleaning regimen is as follows:
1. Fill properly distilled water into a clean tank and connect the fluid tube of
the fog machine to the tank.
2. Run the unit in a well-ventilated area until the tank is almost empty.
3. Use dry cloth to wipe the fog machine. Cleaning is now complete. Refill with
fog liquid. Run the machine briefly to clear any remaining liquid from the
pump and heater.
Note:
All fog machines are prone to clogging due to the thick consistency
of fog liquid and the high temperature at which it vaporizes. However, a
properly maintained fog machine should provide years of reliable use.
Clean with a dry cloth only. Store dry.
If the fog machine is not in use, please clean it before storage. Store the fog
machine in a dry and cool place. Operate the fog machine at least once a
month. A test-run consists of warming-up the machine followed by a few
minutes of fog emission.

Technical Specifications

W-508
- Input voltage
US model : AC 100-120V , 50/60Hz 6.7A
EU model : AC 220-240V , 50/60Hz 3.5A
- Rated power
800W
- Warm-up time
2 minutes (approx.)
- Fluid consumption
13 ml/min
- Fluid tank capacity
0.8l (0.21gal)
- Compatible fluid
Antari FLG Heavy Fog Fluid
Antari FLR Light Fog Fluid
- Operating time
60 mins at max. output
- Ambient temp. range
0 °C - 40 °C (32 °F-104 °F)
- Output
3,000 ft³/min (85 m³/min)
- Control
Manual, Wireless
- DMX channels
--
- Connection
--
- Optional accessories
--
- Dimension
L315 W128 H218 mm
(L12.40 W5.04 H8.58 inch)
- Weight
3.8 kg (8.38 lbs)
W-510
US model : AC100-120V , 50/60Hz 8.5A
EU model : AC 220-240V , 50/60Hz 4.25A
1000W
13 minutes (approx.)
90 ml/min
2.8l (0.74gal)
Antari FLG Heavy Fog Fluid
Antari FLR Light Fog Fluid
0 °C - 40 °C (32 °F-104 °F)
15,000 ft³/min (425 m³/min)
DMX512, Wireless
1 channel
XLR 3-pin (DMX)
W-510-HB Hanging Bracket
L487 W250 H223 mm
(L19.17 W9.84 H8.78 inch)
11.4 kg (25.13 lbs)
-09-