Pipetting (Pip); Setting The Volume; Filling A Tip; Emptying The Tip And Stopping Liquid Dispensing - BRAND HandyStep touch Mode D'emploi

Option
'Go To Multi-Disp'
'Help Work Mode'
For information on the function of this mode, see „Overview of modes"
→ 65.
For information on setting the volume, speed, and other operating
steps found in all modes, see „Operation" → 67.

Setting the volume

Condition
 See „Setting the volume" → 72.
a. Tap on the button.
b. Set the volume.

Filling a tip

Condition
 The volume is set.
 On the touchscreen display, the message
‚Press STEP to fill' appears.
a. Hold the tip vertically in the vessel.
During aspiration, make sure that the tip
opening is always covered by liquid, in order
to prevent air bubbles in the tip.
b. Press the STEP button.
 The tip is filled until the set STEP volume or
the nominal volume of the tip is reached.
To stop filling the tip, press the STEP button.

Emptying the tip and stopping liquid dispensing

a. Press the STEP button.
 The tip is emptied.
To stop dispensing liquid, tap on the X
button.
Meaning
Switches to the Multi-Disp operating mode. The vol-
ume set in Auto-Disp operating mode is also set in
the Multi-Disp operating mode.
Shows the help text for the mode.

Pipetting (PIP)

79