Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
II
- Installation
2.1 Wall mounting
The images used relate to a 4-city Style Mondiale clock. However, the mounting procedure is identical for the 3, 5, 6 and
7-city Style Mondiale models. Refer to the technical specifications on page 19 to view clock dimensions.
1 Open the clock by unscrewing the
screws below the clock (2 screws for
the 3-city Style Mondiale and 3 screws
for the 4, 5, 6 and 7-city Style Mondiale).
2 Attach the mounting bracket to the wall
using 5 x Ø6mm screws with wall
plugs.
3 Feed the power and synchronisation
cables from behind.
4 Carry out the domestic connection and
NTP synchronisation:
- Feed the power cable into the
collars
- Remove the plastic protection
strip
- Connect the cables
- Put the plastic protection strip
back in place.
Insert the right length of cables.
Do not loop the cables inside the
clock.
5 Place the plastic collars to hold the
cables.
6 Place the display on its bracket.
6
1
2
3
5
EN
4
6
Publicité
Table des Matières
