Güde DHH 1330/11 T Traduction Du Mode D'emploi D'origine page 31

Service
Do you have any technical questions? Any claim? Do
you need any spare parts or operating instructions?
We will quickly help you and without needles bure-
aucracy at our web pages at www.guede.com in the
Servicing part. Please help us be able to help you. In
order to identify your device in case of claim we need
the serial No., product No. and year of production. All
this data can be found on the type label. Please enter
it here for future reference:
Serial No.:
Art. No:
Year of production:
Phone.: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail: support@ts.guede.com
Failure removal
Failures
Splitting knife is not moving
Spalter hat keine Leistung
Hydraulic pump is whistling, split-
ting knife running jerkily
Important information for the customer
Please be sure to know that returning the product in or
after the warranty period must be made in the original
packaging.
Causes
Adjust the two-hand control and
starting levers
Few hydraulic oil
Trigger is bent; hydraulic piston on
the valve is not fully seated
Wood has many knobs and the
splitting knife is getting stuck
Control arm is bent
Oil loss, bottom contamination
Few hydraulic oil
Removal
Defective control valve - to be
replaced in a service centre only
Hydraulic oil to be added
Check all screws on the trigger
Adjust the trigger so that the
hydraulic piston on the valve is fully
seated
Lubricate the splitting knife
Put the control arm back to the
starting position
Tighten the screws replace the hose
Hydraulic oil to be added
ENGLISH
27