Controls - Sicam JUMBO TCS60 Notice Originale

en 30 | JUMBO TCS60 | Product description
Pos. Name
1 Remote control
2 General controls
3 Mandrel-holding arm
4 Locking flange
5 Locking jaws
6 Platform
7 Trolley
8 Working arm
9 Mounting tool
10 Bead breaker disk
11 Mounting tool pin
12 Bead breaker disk pin
13 Main switch
14 Locking flange rotation
speed selector
15 Start button
16 Emergency button
17 Oil level indicator
18 Hydraulic pressure knob
19 Hydraulic manometer
20 Warning light of the gear-
box oil
21 Working arm flow regulator
22 Working arm flow regulator
3.6

Controls

Working arm and tool control:
+ Upward movement of the lever lifts the working arm
(1).
+ Downward movement of the lever lowers the working
arm (2).
+ Right movement of the lever rotates counter-clockwi-
se by 180° the tool (3).
+ Left movement of the lever rotates clockwise by 180°
the tool (4).
|
301 971 2010-11-18
Function
Allows the operator to control remotely the operations of the JUMBO TCS60 by means of the cont-
rols and the pedal.
Remote unit control:
2a. Remote unit start.
2b. Emergency shut-off.
2c Double speed button for trolley and chuck-support arm translation movement.
Upward and downward movement of the locking flange.
Hydraulic locking of the rim and clockwise and counter-clockwise rotation.
Rim locking (with different fitting possibilities).
Positioning of the wheel before and after tire mounting and demounting operations.
Horizontal translation of the working arm.
Positioning of the mounting tool and of the bead breaking disk.
Demounting and mounting of the tire
Removal of the tire from its seat on the rim.
Positioning of the mounting tool.
Bead breaking disk positioning.
JUMBO TCS60 starting and turning off.
Locking flange rotation speed selection
JUMBO TCS60 starting.
JUMBO TCS60 emergency shut-off.
JUMBO TCS60 oil level indication.
Adjustment of the mandrel working pressure.
Indication of the machine hydraulic pressure.
Indication that the gearbox oil is at its minimum level.
Pneumatic adjustment of the upward and downward motion of the working arm
Pneumatic adjustment of tool rotation speed.
2
1
2
4 3
1
4
3
Sicam srl società unipersonale