Double Pumps; Faults, Causes, Remedies - Wilo Stratos MAXO Série Notice De Montage Et De Mise En Service

Description of a step-by-step setting procedure using two ex-
amples:
Setting the control function "Underfloor heating – Dynamic Ad-
apt plus"
Action Setting in the menu
Pump setting
Settings assistant
Heating
Underfloor heating
Dynamic Adapt plus
Table 9: Example 1
Setting the control function "Differential pressure ∆p-v"
Action Setting in the menu
Pump setting
Settings assistant
Basic control modes
Installation and operating instructions Wilo-Stratos MAXO/-D/-Z
Action
Table 10: Example 2
Action
7.3

Double pumps

For double pumps, the operating mode main operation and standby
operation with automatic fault-actuated switchover is preset at the
Action
factory.
7.4

Faults, causes, remedies

The pump displays warnings and errors with plain text messages
and hints for troubleshooting.
Setting in the menu
Differential pressure ∆p-v
NOTICE
If there are no warning or error messages, the display
on the control module will switch off 2 minutes after
the last time it was operated.
NOTICE
Follow the detailed instructions online for additional
settings.
➜ See QR code or
www.wilo.com/stratos-maxo/om
en
Action
47