HSM 450.2 Notice D'utilisation page 13

HSM 450.2
9. Maintenance and care
Cleaning:
• Switch off the shredder, pull out the mains
plug.
• When cleaning only use a soft cloth and a
mild soap-water solution. Never use scou-
ring agents, cleaning fl uid, petroleum or
thinners.
10. Technical Data
Cutting type
Shred size (mm)
Sa fe ty ra ting DIN 32757 – 1
Cutting ca pa ci ty (sheets), DIN A4
Cutting speed
Lo ading width
Voltage
Power
for the maximum number of sheets
Dimensions W x D x H (mm)
Weight
Volume of shredded material bag
Noise level (Idle running/ load)
Technical and optical modifi cations reserved.
0602
Paper shredder
When the cutting capacity drops or
the noise increases:
70 g/m 2
2
80 g/m
english
• Lift the fl ap on the top of the
device and spray special cutting
block oil on the blade rollers of
the cutting device.
• Run cutting system forwards and
backwards several times without
feeding paper. Paper dust and
particles are shaken off.
Cross cut
3.9 x 50
3
80 - 85
65 - 70
218 mm/s
443 mm
3 x 400 V, 50 Hz
3 x 208 V, 60 Hz
3 kW
750 x 665 x 1590
220 kg
290 l
58 dB(A) / 70-75 dB(A)
13