HSM 450.2 Notice D'utilisation page 10

Before taking off the cover,
changing the location, cleaning
or anything else other than
normal operation turn off and
unplug the paper shredder!
Main te nan ce and ser vi ce work
may be per for med on ly by:
• HSM cu sto mer ser vi ce
• spe cial ly trai ned staff
(e.g. qua li fi ed electri cians)
• ser vi ce tech ni cians from our
con tracting part ners
4. Installation
• This paper shredder should never be placed
near or over a radiator or heat source.
• The ventilation slots must not be blocked or
covered and they must be at a distance of
at least 10 cm away from walls or furniture.
• Make sure the mains plug is easily acces-
sible.
• Before plugging in the mains plug, check
that the voltage and frequency of your local
mains supply correspond to those stated on
the type plate.
Inserting a new bag for cut material
• Open the front door and pull out the cutma-
terial container completely.
• Insert an new cut material bag into the con-
tainer and fold the upper border approx.
10 cm over the upper frame tubes.
• Push in cut material container completely
and close the door.
10
Paper shredder
5. Operating elements
Membrane keyboard
Ready for operation
green LED
Cut material bag full
red LED
Paper jam – electric motor
overloaded
red LED
Front door or funnel fl ap
opened
red LED
ON pushbutton
shredder is switched on – cutting
system runs in feed direction
Stop pushbutton
cutting system stops – shredder
remains in standby function
Reversing pushbutton
cutting system runs in reverse
direction
Main switch
Turning the main switch 90° in
I
clockwise direction switches the
0
0
machine on.
The main switch can be secured
in the OFF postion with a pad-
lock.
Emergency-stop pushbutton
In emergencies immediately
press the red emergency-stop
pushbutton!
This switches the paper shredder
off.
The cutting system stops.
Emergency-stop is released by
pulling out the pushbutton.
english
HSM 450.2
0602