EUROM Sani-Towel 500 Manuel D'utilisation page 42

Installation
 Remove all the packaging materials and keep out of children's reach.
 After removing the packaging, check whether the appliance shows any damage
or any signs of faults/defects/failures. Do not use the appliance in case of doubt,
but turn to your supplier for checking/replacement.
 Choose a solid, flat and perpendicular wall of non-flammable and non-melting
material (i.e. not wood, synthetic material or suchlike!) to hang the heater on.
 Choose an appropriate position for the appliance, taking into account all
the precautionary measures stated in this instruction manual.
 Mount the appliance according to the installation drawing supplied.
 For your own safety, choose a position where the appliance cannot be
touched from the bath, shower or from behind the washbasin, etc.
 Your heater is now ready for use.
Using for the first time and operating
Make sure that the heater is switched off. Insert the plug into a correctly working
220-240V/50Hz socket or turn the double-pole switch on.
Switch on the heater by pressing the on/off button and the control lamp on the
display will light up.
By pressing the
Day/time setting
 Press the button for 3 seconds
 The display shows 'd': press
1 Monday
2 Tuesday
3 Wednesday
4 Thursday
5 Friday
6 Saturday
7 Sunday
 Press the button to confirm the day setting and enter the time setting: the
display shows
 Press and
 Press the button to confirm the hour setting and enter the minute setting:
the display shows
 Press and
 Press the button to confirm.
and/or buttons, you can set the desired temperature.
en
.
to set the current hour.
.
to set the current minutes.
to set the day and time.
to select the day.
42