EUROM Sani-Towel 500 Manuel D'utilisation page 43

Please note: The day and time indications are reset to factory settings if there is no
power.
Heating mode
 Press the button to open the mode setting. Pressing the
the heating mode through the continual cycle below:
 Comfort mode; press
 ECO mode; press
Please note: ECO mode = Comfort mode -4°C.
 Anti-freeze mode, target temperature in anti-freeze mode is 7°C. The
temperature cannot be adjusted in this mode.
P1/P2/P3 setting heating program
Please note: images 1 to 5 are for illustrative purposes only, these images are not
shown on the display.
Please note: if the day/time setting has not yet been completed or set, the first
time you enter program setting P1/P2/P3, you will be asked to complete or set the
day/time setting first.
P1
Monday-Sunday non-customisable program
From 00:00-01:00am
from 07:00-00:00am
and to set the temperature from 5°C-35°C.
and to set the temperature from 1°C-31°C.
Image 1
comfort mode, from 01:00-07:00am
comfort modus.
43
button, will run
ECO mode and