Publicité
Les langues disponibles
Les langues disponibles
2.
Ensure that the mains voltage is equal to the desired
value
Ammeter does not indicate.
1.
Clean the terminals and put the clamp on again.
2.
Have it checked at a specialist´s . Replace the battery.
Check on the charger working ability on a perfect
charged battery.
Overload Causes
1.
Mixing up the poles when connecting the clamp to the
battery
2.
The battery is heavily or completely discharged.
3.
Battery is completely discharged and its capacity is
higher than the charger power
4.
Battery is damaged or defective (internal elements short
circuit).
Inspections and Maintenance
Unplug before any work on the unit.
•
Use a wet cloth to clean the plastic parts. Do not use
detergents, solvents and sharp articles.
•
Use a soft brush or a paint brush to remove the settled
dust from the vent and moving parts.
•
Lubricate the wheels regularly!
Inspections and Maintenance Safety Instructions
After every use
Clean the vents and moving parts from dust
Regularly
Oil the moving metal parts (multi-purpose oil)
Regularly
Check all the screws to see if they are tight.
12
Publicité
