Bresser 4CAST PC Mode D'emploi page 74

ACCESSING TEMPERATURE AND HUMIDITY FROM DIFFERENT WIRELESS
OUTDOOR THERMOHYGROMETER
From the Main Unit: Press [
starts flashing.
VIEWING TEMPERATURE AND HUMIDITY DISPLAY FOR EACH CHANNEL
For Static Display:
In Temperature and Humidity Mode, each press of [ CHANNEL ] rotates display between
different channels.
For Cycling Display:
To enable automatic rotating between different channel displays, press and hold [ CHANNEL ],
until the icon is displayed. Each valid channel will now be alternately displayed for 5s.
ROTATING BETWEEN TEMPERATURE AND DEW POINT DISPLAY
Each press of [ SET ] rotates temperature display between:
• Temperature and Relative Humidity
• Dew Point Temperature and Relative Humidity
SETTING UNITS FOR TEMPERATURE DISPLAY (ºC OR ºF)
Press and hold [ SET ] to convert units between degrees Celsius ºC and degrees Fahrenheit ºF.
ACTIVATING/DEACTIVATING THE TEMPERATURE ALERTS
1. In Temperature and Humidity Mode, each press of [ ALARM/CHART ] rotates channel
temperature display between:
• Current Temperature for corresponding channel
• Upper Temperature Alert (displays OFF if deactivated):
• Lower Temperature Alert (displays OFF if deactivated):
2. When the above alerts are displayed, Pressing [
corresponding alert.
SETTING UP THE TEMPERATURE ALERTS
1. In Temperature and Humidity Mode, press [ ALARM/CHART ] to select alarm which you
wish to configure.
2. Press and hold [ ALARM/CHART ] until channel temperature, and [
flashing in the display.
3. Set Value for Temperature Alert:
Press [ ] or [
Press [ ALARM/CHART ] to confirm your selection.
4. Upon completion the display will be returned to the temperature alert selection screen.
] or [ ] until the IN icon on the upper right of the display
] to adjust value. Press and hold either button for fast advance.
icon displayed
icon displayed
] or [ ] will activate/deactivate the
74
] or [ ] icon starts