Vermeiren Carpo 2 Mode D'emploi page 18

2
4
7a
Vermeiren is responsible for the changes in the software. For changes in the software contact
Vermeiren.
2.10.2 Operator control with LCD screen

Put the ON/OFF key switch on, please wait for at least 3 seconds before you press the speed
lever otherwise you have a "delay protection" alarm.

Now the battery level indicator

Now turn the speed control (, 

Push the drive lever with your thumbs forwards (right lever for forward movement, left lever for
backward movement).

To sound the horn, press the horn button .

To put on the front and back lights, press the light button .

To put on the emergency flashers, press button

To put on the indicator lights, press the desired button  and
indicator).

To stop the scooter loosen the speed lever under the operator control.
1
3
6
5
7
7b
will light up and shows the current level of your batteries.
13
) to the desired driving speed.
,
Page 16
1 = Battery level indicator
2 = Head lights
3 = Horn
4 = Indicator (left)
5 = Emergency lights
6 = Indicator (right)
7 = Speed switch
7a = Speed control (slow)
7b = Speed control (fast)
.
11
(left = left indicator, right = right
12
Carpo 2
2015-07