Countdown Timer - Conrad Electronic 86 01 02 Notice D'emploi

14. Countdown Timer

1
3 0
A
ST./STP.
3 0 2 0
B
ST./STP. ST./STP. ST./STP.
3 0 2 0
C
ST./STP. LAP/RESET LAP/RESET
0 10
t i m e
52
The countdown timer can be set to a maximum time of 23 hours, 59
minutes, 59 seconds which the wristwatch then counts down to "0:00:00",
whereby an alarm signal sounds.
2
a) Adjusting the Timer
• First change to the countdown timer display mode (e.g. press the
• Start the setting mode by holding down the "MODE" button for approx.
0
• You can increase the displayed value with the "ST./STP" button, the
b e e p
2 0 0
• Briefly press the "MODE" button, the minutes flash. You can increase the
b e e p
3 0
• Briefly press the "MODE" button, the seconds flash. You can increase
20 30 40
• Exit the setting mode by holding down the "MODE" button for an
"MODE" button repeatedly until the timer symbol "TR" (1) is displayed).
two seconds. The hours start to flash.
"LAP/RESET" button reduces the value (hold either button down for fast
adjustment).
displayed value with the "ST./STP" button, the "LAP/RESET" button
reduces the value (hold either button down for fast adjustment).
the displayed value with the "ST./STP" button, the "LAP/RESET" button
reduces the value (hold either button down for fast adjustment).
extended period.