Switching Between Current Uv Index And Display Of Highest Value - Conrad Electronic 86 01 02 Notice D'emploi

e) Switching Between Current UV Index and Display of Highest Value
1
3
4
ST./STP.
6
7
4
46
In highest value display mode, the highest value measured remains in the display and
2
is not replaced by a lower value. This allows a maximum value to be easily read after
measurement.
• Press the "MODE" button quickly and repeatedly until the UV index is shown in the
lower line of the display.
5
• Shortly pressing the "ST./STP" button switches between the current UV index
measurement (upper figure) and the maximum value (lower figure).
• The saved maximum value can be reset to "0.0" by holding down the "LAP/RESET"
button.
2
1 = Current UV Index (bar display)
2 = Colour code for UV index
3 = Current UV index (UVI)
8
4 = Alarm symbol for UV index
5 = Current UV index (numerical value)
6 = Highest UV index value (bar display)
7 = Highest UV index value ("PUVI" = Peak UVI)
8 = Highest UV index value (numerical value)