Hilti PD-S Mode D'emploi page 14

7.2 Transport
The batteries must be insulated or removed from the product before it
is shipped or sent by mail.
▶ Use the Hilti packaging or packaging of equivalent quality for transporting
or shipping your equipment.
7.3 Storage and drying
▶ Do not put the product into storage when wet. Allow it to dry before
putting it away.
▶ Observe the temperature limits given in the Technical Data section which
are applicable to storage or transport of the equipment.
▶ Check the accuracy of the equipment before it is used after a long period
of storage or transportation.
8 Disposal
Most of the materials from which Hilti tools and appliances are manu-
factured can be recycled. The materials must be correctly separated before
they can be recycled. In many countries, your old tools, machines or appli-
ances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti
representative for further information.
▶ Do not dispose of power tools, electronic equipment or batteries as
household waste!
9 RoHS (Restriction of Hazardous Substances)
Click on the link to go to the table of hazardous substances:
qr.hilti.com/r8128694.
There is a link to the RoHS table, in the form of a QR code, at the end of this
document.
10 Additional classification data (China)
Permissible scatter of the refer-
ence measurement
Repeatability
Display error
11 Manufacturer's warranty
▶ Please contact your local Hilti representative if you have questions about
the warranty conditions.
8 English
Class 1, ≤ 1 mm
Class 1, ≤ 1 mm
Stage 1, ± 3 mm + 5 × 10-5 D (D =
measurement distance)
2190183
*2190183*