Storing Stations; Storing Stations Automatically (Travelstore); Listening To Stored Stations; Scanning Receivable Stations (Scan) - Blaupunkt London MP37 Mode D'emploi Et De Montage

Storing stations

Storing stations manually
u
Select the desired memory bank FM1,
FM2, FMT or the AM waveband.
u
Tune into the desired station.
u
Press and hold down one of the station
buttons 1 - 5 5 for longer than two
seconds to assign the station to that
button.
Storing stations automatically
(Travelstore)
You can automatically store the fi ve stations
offering the strongest reception in the re-
gion for FM and AM. The stations are stored
in the FMT or AM memory bank.
Note:
Previously stored stations in this bank
are replaced by newly stored stations.
u Use the BAND/TS button = to select
one of the memory banks FM1, FM2 or
FMT for storing FM stations or the AM
waveband for storing AM stations.
u
Press and hold down the BAND/TS but-
ton = for longer than two seconds.
The storing procedure begins. "FM TSTORE"
or "AM TSTORE" appears on the display.
After the process has completed, the radio
will play the station that is stored in memory
location 1 of the FMT or AM memory bank.

Listening to stored stations

u
Select the memory bank or waveband.
u
Press one of the station buttons 1 - 5
5.
The stored station is played if it can be re-
ceived.
Scanning receivable stations
(SCAN)
You can use the scan function to play all the
receivable stations briefl y. You can set the
scanning time in the menu to between 5
and 30 seconds.
Starting SCAN
u
Press and hold down the MENU button
; for longer than two seconds.
The radio scans the next receivable station.
The current memory bank and "SCAN" ap-
pear briefl y on the display followed by a
fl ashing display of the current station name
or frequency.
Cancelling the SCAN and continuing to
listen to a station
u Press the MENU button ;.
Scanning stops and the radio continues
playing the station that it tuned into last.
Radio mode
15