Setting The Scanning Time; Cd Mode; Switching To Cd Mode - Blaupunkt London MP37 Mode D'emploi Et De Montage

Radio mode

Setting the scanning time

u Press the MENU button ;.
u
Press the or
edly until "SCAN TIME" appears on the
display.
u Press the or button 8 to open the
menu.
u
Set the desired scan time with the
button 8.
When you have fi nished making your
changes,
u press the MENU button twice ;.
Note:
The defi ned scanning time is also ap-
plied by the system to scanning carried
out in CD and CD changer mode.
16
button : repeat-
or

CD mode

You can use this device to play standard au-
dio CDs, CD-Rs and CD-RWs with a diame-
ter of 12 cm. To avoid problems when play-
ing self-burned CDs, you should not burn
CDs at speeds greater than 16-speed.
Risk of severe damage to the
CD drive!
CD singles with a diameter of 8 cm and non-
circular contoured CDs (shape CDs) must
not be used.
We accept no responsibility for any damage
to the CD drive that may occur as a result of
the use of unsuitable CDs.
To ensure proper functioning, use only CDs
with the Compact-Disc logo. Copy-protected
CDs can cause playback problems.
Blaupunkt cannot guarantee the proper
functioning of copy-protected CDs!
Besides being able to play audio CDs on this
device, you can also play CDs containing
MP3/WMA music fi les. For further informa-
tion, please read the chapter entitled "MP3/
WMA mode".

Switching to CD mode

If there is no CD inserted in the drive,
u button 1.
press the
The control panel opens.
u
Gently insert the CD with its printed
side uppermost into the drive until you
feel some resistance.
CD mode