Displaying The Time Continuously When The Device Is Off And The Ignition Is On; Sound; Adjusting The Bass - Blaupunkt London MP37 Mode D'emploi Et De Montage

Clock - Time
u
Press the or
between the modes.
When you have fi nished making your
changes,
u press the MENU button ;.
Displaying the time continuously
when the device is off and the
ignition is on
To display the time when the device is off
and the vehicle ignition is on,
u press the MENU button ;.
u
Press the or
until "CLOCK OFF" or "CLOCK ON" ap-
pears on the display.
u
or
Press the
the display between CLOCK ON and
CLOCK OFF.
When you have fi nished making your
changes,
u press the MENU button ;.
26
button 8 to switch
button : repeatedly
button 8 to switch

Sound

You can adjust the sound settings (bass,
middle and treble) separately for each
source (radio, CD, CD changer, AUX, and
telephone/navigation). The volume distri-
bution settings (balance and fader) and
X-BASS apply to all the audio sources ex-
cept for telephone/navigation. You can ad-
just the volume distribution settings sepa-
rately for telephone/navigation.
Note:
The settings of the sound for telephone/
navigation can only be made during a
telephone call/voice output.

Adjusting the bass

You can select 1 of 4 middle frequencies
(60 Hz, 80 Hz, 100 Hz, 200 Hz). In ad-
dition, you can adjust the level between
-7 and +7 for the selected bass frequency.
Adjusting bass frequency and level
u Press the AUD button <.
"BASS" appears on the display.
u
Press the or
reach the BASS submenu.
u or button 8 repeatedly
Press the
until the desired bass frequency ap-
pears on the display.
u
Press the or
the level between -7 and +7.
u Press the AUD < button twice to exit
the menu.
Sound
button : once to
button : to adjust