Setting The Display Illumination Colour - Blaupunkt London MP37 Mode D'emploi Et De Montage

Setting the display illumination
colour
For the display illumination, you can mix a
colour from the RGB spectrum (red green
blue) or select a colour during a colour
seek.
Mixing a colour for the display
illumination
To customise the display illumination to suit
your tastes you can mix a colour yourself
using the three primary colours red, green
and blue.
u Press the MENU button ;.
u
Press the or
edly until "DISP COL" appears on the
display.
u Press the or button 8 to open the
menu.
The menu for mixing your own colour is dis-
played. "R", "G", and "B" are displayed with
the current values. The setting for "R" is ac-
tivated.
u
Press the or
edly until the desired colour value is
displayed.
Press the or button 8 to move the
u
selection marker to the position after
the other colours.
u
Adjust the other colour components to
suit your preferences.
When you have fi nished making your
changes,
u press the MENU button twice ;.
button : repeat-
button : repeat-
Selecting a display illumination during a
colour scan
u Press the MENU button ;.
u
Press the or
edly until "COL SCAN" appears on the
display.
u or button 8 to start the
Press the
colour seek.
The device starts changing the display illu-
mination colour.
To select the currently set colour,
u press the MENU button ;.
To start the seek tuning again,
u or button 8.
press the
If you found the desired colour,
u press the MENU button twice ;.
Display
button : repeat-
31