Service Instructions - Meister TS800M Traduction Du Manuel D'utilisation Original

5461560-Tischkreiss_man 22.08.18 14:13 Seite 52
• The workpiece jams while sawing?
– Readjust riving knife!
– The parallel stop tilts or moves.
Lock parallel stop setting!
• The machine gets hot?
– Chip extractor is not working properly.
– Chip build-up. Empty chip extractor!
• The saw is not cutting?
– The saw blade has been fitted the
wrong way round.
• The machine is vibrating violently?
– The saw blade is out of balance.
Replace the saw blade!
CAUTION! Electrical and battery
operated units that no longer work
should not be disposed of in the
household waste! They are to be
collected separately, in accordance with
the 2012/19/EU directive
for the disposal of
electrical and electronic
waste, and sent for proper
and environ mentally-
friendly recycling.
Please discard power tools no longer
usable at a local collection point.
Collection and disposal of packaging
materials separately by types
complying with local rules and
regulations. For details, please contact
your municipal authority concerned.
11 – Service instructions
• Store the machine, operating
instructions and where necessary the
accessories in the original packaging.
In this way you will always have all the
information and parts ready to hand.
• Meister devices are to a large extent
52
maintenancefree, a damp cloth being
sufficient to clean the casing. Do not
drop electrical machines in water.
Please note additional hints given in
the operating instructions.
• Meister devices are subject to stringent
quality control. If however a functional
fault shoult occur, send the device to
our servicing address. The repairs will
be carried out in a short time.
• A brief description of the defect
speeds up the faulttracing and repair
time. If within the guarantee period,
please enclose the guarantee
document and the proof of purchase.
• In so far as a repair under guarantee
is not concerned, we will charge the
repair costs to your account.
PLEASE NOTE! Opening of the
device invalidates the guarantee
claim.
IMPORTANT! We point out
expressly that in accordance
with the Product Liability Act we do
not take responsibility for any
damage caused by our appliances, in
so much that said damage is caused
by improper repair, or original parts
or parts released by us not being
used when parts are changed, or
repairs not being conducted by
Meister Werkzeuge GmbH, Customer
Service or an authorised specialist!
The same applies analogously to the
accessories used.
• Pack the device well or use the
original packaging in order to avoid
transit damage.
• Even after the expiry of the guarantee
period, we would like to help you and
carry out any repairs at a favourable
price.