SCHOLTES SOTH1900B Manuel D'utilisation page 28

Problem
The hob does not turn on
The buttons on the control panel do
not do anything
The buttons on the control panel do
not work properly
The glass is scratched
Some pots and pans make a noise (a
clicking sound)
The hob makes a strange noise when it
is used at high power
There is a fan noise
The pot or pan does not heat up and
the display does not show anything.
The hob or a cooking zone turned off
early, made a beeping sound and a
code is shown on the display
Possible cause
There is no electricity
The control panel is locked
There may be some water on the
control panel.
The base of your pots and pans is not
smooth
An abrasive sponge or product was
used
This could be due to the materials in
your pot or pan (layers of different
metals that vibrate differently)
This is a normal part of the induction
technology
Your hob comes equipped with fans to
cool its electronic components.
The fan may keep running after the
hob has turned off.
The hob cannot detect the pot or pan
as it is not compatible.
The hob cannot detect the pot or pan
as it is too small or incorrectly placed
on the cooking zone.
There is a technical problem
28
Solution
Make sure your hob is plugged in
correctly.
Make sure there has not been a power
cut in your home or neighbourhood.
If you have no problems like this,
contact the technical customer
service.
Unlock the control panel (see "How to
use the hob")
Make sure the control panel is dry and
that your finger is fully flat when you
press the buttons
Use pots and pans with a flat, smooth
base.
See the cleaning instructions
This is not a problem
The sound is not a problem and should
stop once the power of the hob is
lowered
This is not a problem. Do not unplug
your hob while the fan is running.
Use a pot or pan that is compatible
with induction heating.
Make sure your pot or pan is in the
right place .
Write down the error code, turn the
hob off and contract the certified
technical customer service.